Comments
DECT or Digital Enhanced Cordless Telecommunications (formerly Digital European Cordless Telephone) is an ETSI standard for digital portable phones (cordless home telephones), commonly used for domestic or corporate purposes. DECT can also be used for wireless broadband data transfers. DECT is recognised by the ITU as fulfilling the IMT-2000 requirements and thus qualifies as a 3G system. Within the IMT-2000 group of technologies, DECT is referred to as IMT-FT (Frequency Time).
DECT was developed by ETSI but has since been adopted by many countries all over the world. The original DECT frequency band (1880 MHz–1900 MHz) is used in all countries in Europe. Outside Europe, it is used in most of Asia, Australia and South America. In the United States, the Federal Communications Commission in 2005 changed channelization and licensing costs in a nearby band (1920 MHz–1930 MHz, or 1.9 GHz), known as Unlicensed Personal Communications Services (UPCS), allowing DECT devices to be sold in the U.S. with only minimal changes. These channels are reserved exclusively for voice communication applications and therefore are less likely to experience interference from other wireless devices such as baby monitors and wireless networks.
DECT 6.0
DECT devices made for use in the U.S. use the term DECT 6.0 to distinguish them from both DECT devices used elsewhere and U.S. cordless equipment operating in the 900 MHz, 2.4 GHz and 5.8 GHz ISM bands. It is a marketing term coined by Rick Krupka, Director of Cordless Products at Siemens, when he was pushing the FCC to accept DECT in the US, and is not a spectrum band reference. The term "6.0 GHz" for DECT 6.0 phones is incorrect as they operate at 1.9 GHz, but the term DECT 1.9 might have confused customers, as they may solely interpret larger numbers as signifying a better (or later) product.
Advantages for the Consumer
DECT 6.0 cordless home telephones are expected to deliver the following advantages for consumers:
* Longer operational distance - at 1.9 GHz, DECT 6.0 cordless phones can operate over a greater distance than 2.4 GHz or 5.8 GHz phones.
* No More Interference - unlike 2.4 Ghz cordless, DECT 6.0 phones are virtually immune to household interference, and vice versa. If you have a wireless computer network in your home, DECT 6.0 won't disrupt your internet use.
* Security - Encryption is a layer of security that standard cordless phones just don't have. As information and identity theft is on the rise, DECT encryption helps keep your personal communications safe.
* Call Quality - Extra security isn't just for safety, it gives you clearer calls without crossover traffic.
* Easy Expansion - Extra handsets are easy to bring into a DECT system, and you can even make internal calls to other handsets in the house!
* Battery Life - A DECT phone will last as much as 30% longer than a 5.8 GHz phone.
Application
The DECT standard fully specifies a means for a portable unit such as a cordless telephone to access a fixed telecoms network via radio, but unlike the GSM standards does not specify any internal aspects of the fixed network itself. Connectivity to the fixed network (which may be of many different kinds) is done through a base station or "Radio Fixed Part" to terminate the radio link, and a gateway to connect calls to the fixed network. In most cases the base station connection is to the public switched telephone network or telephone jack, although connectivity with newer technologies such as Voice over IP has become available. There are also other devices such as some baby monitors utilising DECT, and in these devices there is no gateway functionality.
The DECT standard originally envisaged three major areas of application:
* domestic cordless telephony, using a single base station to connect one or more handsets to the public telecoms network, which is now available
* enterprise premises cordless PABXs and wireless LANS, using many base stations for coverage. Calls continue as users move between different coverage cells, through a mechanism called handover. Traffic both within the system and to the public telecoms network
* public access, using large numbers of base stations to provide building or urban area coverage as part of a public telecoms network.
Of these, the domestic application (cordless home telephones) has been extremely successful. The enterprise PABX market had some success, and all the major PABX vendors have offered DECT access options. The public access application has not succeeded, since public cellular networks have fulfilled the need better. The one major application of DECT for public access, the Telecom Italia's FIDO network covering major cities in Italy, lasted about a year and was shut in 1997.
DECT has also been used for Fixed Wireless Access as a substitute for copper pairs in the "last mile" in countries such as India and South Africa. By using directional antenna and sacrificing some traffic capacity, cell coverage could extend to over 10 km. In Europe, the power limit laid down for use of the DECT spectrum (250 mW peak) was expressed in ERP, rather than the more commonly-used EIRP, thus permitting the use of powerful directional antenna to produce much higher EIRP and hence long ranges.
[edit] VoIP/IP-DECT
In business, DECT has become an essential part of many PABX installations with manufacturer's proprietary methods of supporting PABX features over the DECT standard. Since the onset of the migration from TDM PBXs to VoIP and VoIP hybrid solutions, manufacturers such as Philips and Aastra have developed IP-DECT solutions where the backhaul from the base station is VoIP (H323 or SIP) while the handset loop is still DECT. These solutions are sometimes restricted by the cost of the base station but may be economic where the concentration of users is high. PBX networking vendors such as Cisco promote the adoption of WIFI-VoIP handsets as the replacement for DECT, but this imposes significant overhead on the design and complexity of the WIFI network in order to provide roaming, coverage and reservation of bandwidth, not to mention QOS. The question of Voice Mobility in commercial environments is still very open. DECT is robust but needs its own radio infrastructure. WIFI is deployed as an ad-hoc network environment. The new entrant into the field will be 3G-nano Cell technology where VoIP sessions would be supported as a private connection onto a 3G handset/PDA.
[edit] Features
Typical abilities of a domestic DECT Generic Access Profile (GAP) system include:
* Multiple handsets to one base station and one phone line socket. This allows several cordless telephones to be placed around the house, all operating from the same telephone jack. Additional handsets usually have a battery charger station instead of a base station. The additional handsets do not require additional telephone sockets nor additional transceivers
* Interference-free wireless operation to around 100 metres outdoors. Operates clearly in common congested domestic radio traffic situations. For instance, generally immune to interference from Wi-Fi networks or video senders, Bluetooth technology, baby monitors and other wireless devices.
* Ability to make internal (intercom) calls between handsets.
* An extended range between the telephone and base (allowing greater physical distance between the two devices)
* Extended battery talk-time, sometimes up to 24 hours
[edit] Technical details
Some DECT properties:
* Audio codec: G.726
* Net bit rate: 32 kbit/s
* Frequency: 1880 MHz–1900 MHz in Europe, 1920 MHz–1930 MHz in the US
* Carriers: 10 (1,728 kHz spacing) in Europe, 5 (1,728 kHz spacing) in the US
* Time slots: 2 x 12 (up and down stream)
* Channel allocation: dynamic
* Average transmission power: 10 mW (250 mW peak) in Europe, 4 mW (100 mW peak) in the US
The DECT physical layer uses:
* Frequency division multiple access (FDMA),
* Time division multiple access (TDMA) and
* Time division duplex (TDD)
This means that the radio spectrum is divided into physical channels in two dimensions: frequency and time.
The maximum allowed power for portable equipment as well as base stations is 250 mW. A portable device radiates an average of about 10 mW during a call as it is only using one of 24 time slots to transmit.
The DECT media access control layer is the layer which controls the physical layer and provides connection oriented, connectionless and broadcast services to the higher layers. It also provides encryption services with the DECT Standard Cipher (DSC). The encryption is fairly weak, using a 35-bit initialization vector and encrypting the voice stream with 64-bit encryption. There are reports[1] that the security algorithm has been broken.[2]
The DECT data link layer uses LAPC (Link Access Protocol Control), a specially designed variant of the ISDN data link protocol called LAPD. They are based on HDLC.
The DECT network layer always contains the following protocol entities:
* Call Control (CC)
* Mobility Management (MM)
Optionally it may also contain others:
* Call Independent Supplementary Services (CISS)
* Connection Oriented Message Service (COMS)
* Connectionless Message Service (CLMS)
All these communicate through a Link Control Entity (LCE).
The call control protocol is derived from ISDN DSS1, which is a Q.931 derived protocol. Many DECT-specific changes have been made. The mobility management protocol includes many elements similar to the GSM protocol, but also includes elements unique to DECT.
Unlike the GSM protocol, the DECT network specifications do not define cross-linkages between the operation of the entities (eg Mobility Management and Call Control). The architecture presumes that such linkages will be designed into the interworking unit that connects the DECT access network to whatever mobility-enabled fixed network is involved. By keeping the entities separate, the handset is capable of responding to any combination of entity traffic, and this creates great flexibility in fixed nework design without breaking full interoperability.
DECT GAP is an interoperability profile for DECT. The intent is that two different products from different manufacturers that both conform not only to the DECT standard, but also to the GAP profile defined within the DECT standard, are able to interoperate for basic calling. The DECT standard includes full testing suites for GAP, and GAP products on the market from different manufacturers are in practice interoperable for the basic functions.
[edit] DECT for Data Networks
Other interoperability profiles exist in the DECT suite of standards, and in particular the DPRS (DECT Packet Radio Services) bring together a number of prior interoperability profiles for the use of DECT as a wireless LAN and wireless internet access service. With good range (up to 200 m indoors and 6 km using directional antennae outdoors), dedicated spectrum, high interference immunity, open interoperability and data speeds of around 500 kbit/s, DECT appeared at one time to be a superior alternative to Wi-Fi. The protocol capabilities built into the DECT networking protocol standards were particularly good at supporting fast roaming in the public space, between hotspots operated by competing but connected providers. The first DECT product to reach the market, Olivetti's Net3, was a wireless LAN, and German firms Dosch & Amand and Hoeft & Wessel built niche businesses on the supply of data transmission systems based on DECT.
However, the timing of the availability of DECT, in the mid 1990s, was too early to find wide application for wireless data outside niche industrial applications. Whilst contemporary providers of Wi-Fi struggled with the same issues, providers of DECT retreated to the more immediately lucrative market for cordless telephones. A key weakness was also the inaccessibility of the U.S. market, due to FCC spectrum restrictions at that time. By the time mass applications for wireless Internet had emerged, and the U.S. had opened up to DECT, well into the new century, the industry had moved far ahead in terms of performance and DECT's time as a wireless data transport was past.
Ironically, the failure of DECT as a data protocol became a strength when DECT 6.0 phones finally appeared in the U.S. in late 2005. By this time, the ISM bands had become crowded in the U.S., especially the 2.4 GHz band which is used by both the most common variants of Wi-Fi, 802.11b and 802.11g, and many cordless phones; thus interference between unlicensed devices has become common in these bands. However, because Wi-Fi does not operate in the UPCS band and DECT devices negotiate with each other for the available spectrum, not only are DECT 6.0 phones immune from this type of interference, their operation does not impair other nearby devices operating on the same frequency, which is a common issue with 2.4 GHz cordless phones.
[edit] Radio links
DECT operates in 1880-1900 MHz band and defines ten channel from 1881.792 MHz to 1897.344 MHz with band gap of 1728 kHz. Each base station frame provides 12 duplex speech channel with each time slot occupying any of channel. DECT operates in multicarrier /TDMA/TDD structure. DECT also provides Frequency Hopping Multiple Access over TDMA/TDD structure. If frequency hopping is avoided then each base station can provide up to 120 channels in the DECT spectrum before frequency reuse. Each time slot can be assigned to a different channel in order to exploit advantages of frequency hopping and avoid interference from other users in asynchronous fashion.[
Posted by waqasahmad
The Digital Enhanced Cordless Telecommunications (formerly Digital European Cordless Telephone) is an ETSI standard for digital portable phones (cordless home telephones), commonly used for domestic or corporate purposes. DECT can also be used for wireless broadband data transfers.
Posted by crouse
Digital Enhanced Cordless Telecommunications (formerly Digital European Cordless Telephone) is an ETSI standard for digital portable phones (cordless home telephones), commonly used for domestic or corporate purposes. DECT can also be used for wireless broadband data transfers.
Posted by robina
It was developed by ETSI but has since been adopted by many countries all over the world. The original DECT frequency band (1880 MHz–1900 MHz) is used in all countries in Europe. Outside Europe, it is used in most of Asia, Australia and South America. In the United States, the Federal Communications Commission in 2005 changed channelization and licensing costs in a nearby band (1920 MHz–1930 MHz, or 1.9 GHz), known as Unlicensed Personal Communications Services (UPCS), allowing DECT devices to be sold in the U.S.
Posted by waqqas1
A system for transmitting a compressed video signal over a radio link has been developed. The scheme involves altering the output bitstream of an H.261 videocodec to allow data transmission over a DECT demonstrator system. The system was used to demonstrate acceptable picture quality at bit rates between 32 kbit/s and 384 kbit/s. The high error rate possible for a radio link requires that techniques for improving the error resilience of the coding scheme be investigated. The resilience may be improved by forward error correction, interleaving of the data stream and by repeating blocks which have been corrupted by transmission. The viability of the system has been proven by hardware trials but further study is required before the system is usable on a real network.
Answer No. 2
DECT or Digital Enhanced Cordless Telecommunications (formerly Digital European Cordless Telephone) is an ETSI standard for digital portable phones (cordless home telephones), commonly used for domestic or corporate purposes. DECT can also be used for wireless broadband data transfers. DECT is recognised by the ITU as fulfilling the IMT-2000 requirements and thus qualifies as a 3G system. Within the IMT-2000 group of technologies, DECT is referred to as IMT-FT (Frequency Time).
DECT was developed by ETSI but has since been adopted by many countries all over the world. The original DECT frequency band (1880 MHz–1900 MHz) is used in all countries in Europe. Outside Europe, it is used in most of Asia, Australia and South America. In the United States, the Federal Communications Commission in 2005 changed channelization and licensing costs in a nearby band (1920 MHz–1930 MHz, or 1.9 GHz), known as Unlicensed Personal Communications Services (UPCS), allowing DECT devices to be sold in the U.S. with only minimal changes. These channels are reserved exclusively for voice communication applications and therefore are less likely to experience interference from other wireless devices such as baby monitors and wireless networks. DECT devices made for use in the U.S. use the brand DECT 6.0 to distinguish them from both DECT devices used elsewhere and U.S. cordless equipment operating in the 900 MHz, 2.4 GHz and 5.8 GHz ISM bands. The "DECT 6.0" term was coined by Rick Krupka, Director of Cordless Products at Siemens, when he was driving the acceptance of DECT in the US with the FCC. This was a marketing term not a spectrum band reference; the term "6.0 GHz" for DECT 6.0 phones is incorrect, since it operates at 1.9 GHz. Calling it DECT 1.9 would have confused the market place in expecting the bigger the number the better the product. In fact, however, at 1.9 GHz cordless phones can operate over a greater distance than 2.4 GHz or 5.8 GHz can.
Posted by jahangir1983
-