Can anybody help me describing the purpose and basic functionality of things like HSRP, VRRP etc?
Hayden 17-September-2007 06:04:42 PM
Comments


explanation of HSRP & VRRP
VRRP:Virtual Router Redundancy Protocol, an election protocol that dynamically assigns responsibility for one or more virtual router(s) to the VRRP router(s) on a LAN, allowing several routers on a multiaccess link to utilize the same virtual IP address. A VRRP router is configured to run the VRRP protocol in conjunction with one or more other routers attached to a LAN. In a VRRP setup, one router is elected as the master router with the other routers acting as backups in case of the failure of the master router.
HSRP:Hot Standby Routing Protocol, a proprietary protocol from Cisco. HSRP is a routing protocol that provides backup to a router in the event of failure. Using HSRP, several routers are connected to the same segment of an Ethernet, FDDI or token-ring network and work together to present the appearance of a single virtual router on the LAN. The routers share the same IP and MAC addresses, therefore in the event of failure of one router, the hosts on the LAN are able to continue forwarding packets to a consistent IP and MAC address. The process of transferring the routing responsibilities from one device to another is transparent to the user.
Posted by waqasahmad


HSRP:
Hot Standby Routing Protocol, a proprietary protocol from Cisco. HSRP is a routing protocol that provides backup to a router in the event of failure. Using HSRP, several routers are connected to the same segment of an Ethernet, FDDI or token-ring network and work together to present the appearance of a single virtual router on the LAN. The routers share the same IP and MAC addresses, therefore in the event of failure of one router, the hosts on the LAN are able to continue forwarding packets to a consistent IP and MAC address. The process of transferring the routing responsibilities from one device to another is transparent to the user.
VRRP:
Virtual Router Redundancy Protocol, an election protocol that dynamically assigns responsibility for one or more virtual router(s) to the VRRP router(s) on a LAN, allowing several routers on a multiaccess link to utilize the same virtual IP address. A VRRP router is configured to run the VRRP protocol in conjunction with one or more other routers attached to a LAN. In a VRRP setup, one router is elected as the master router with the other routers acting as backups in case of the failure of the master router.
Posted by bennith_samuel


Posted: 28-September-2007 12:29:31 PM By: bennith_samuel

HSRP:
Hot Standby Routing Protocol, a proprietary protocol from Cisco. HSRP is a routing protocol that provides backup to a router in the event of failure. Using HSRP, several routers are connected to the same segment of an Ethernet, FDDI or token-ring network and work together to present the appearance of a single virtual router on the LAN. The routers share the same IP and MAC addresses, therefore in the event of failure of one router, the hosts on the LAN are able to continue forwarding packets to a consistent IP and MAC address. The process of transferring the routing responsibilities from one device to another is transparent to the user.
VRRP:
Virtual Router Redundancy Protocol, an election protocol that dynamically assigns responsibility for one or more virtual router(s) to the VRRP router(s) on a LAN, allowing several routers on a multiaccess link to utilize the same virtual IP address. A VRRP router is configured to run the VRRP protocol in conjunction with one or more other routers attached to a LAN. In a VRRP setup, one router is elected as the master router with the other routers acting as backups in case of the failure of the master router.

Posted: 31-December-2008 01:18:41 PM By: waqasahmad

explanation of HSRP & VRRP
VRRP:Virtual Router Redundancy Protocol, an election protocol that dynamically assigns responsibility for one or more virtual router(s) to the VRRP router(s) on a LAN, allowing several routers on a multiaccess link to utilize the same virtual IP address. A VRRP router is configured to run the VRRP protocol in conjunction with one or more other routers attached to a LAN. In a VRRP setup, one router is elected as the master router with the other routers acting as backups in case of the failure of the master router.
HSRP:Hot Standby Routing Protocol, a proprietary protocol from Cisco. HSRP is a routing protocol that provides backup to a router in the event of failure. Using HSRP, several routers are connected to the same segment of an Ethernet, FDDI or token-ring network and work together to present the appearance of a single virtual router on the LAN. The routers share the same IP and MAC addresses, therefore in the event of failure of one router, the hosts on the LAN are able to continue forwarding packets to a consistent IP and MAC address. The process of transferring the routing responsibilities from one device to another is transparent to the user.