|
Guys, Explain Duplex Configuration? AbramianDaniel 25-April-2009 01:27:14 AMComments Half duplex Full duplex Posted by crouse it is Full duplex(i.e two way) Half duplex(i.e one way) Posted by crouse it is Full duplex(i.e two way) Half duplex(i.e one way) Posted by waqasahmad Setting the appropriate duplex mode is done at the interface configuration prompt. The choices you have are Auto, Full, or Half; the default is Auto, so your switch should work in most cases if you do not make any configuration changes at all. Note that if you manually set duplex to Half or Full, the interface(s) will be locked to that setting and will no longer use the Auto negotiation to dynamically determine the duplex setting of the link(s). Following is an example of a configuration that sets Interface FastEthernet 0/1 to Full duplex/100Mbs, Interface 0/2 to Half Duplex/10Mbs, and Interface 0/3 to Auto Duplex/Auto speed: 2950#config terminal 2950(config)#interface fastethernet 0/1 2950(config-if)#duplex full 2950(config-if)#speed 100 2950(config-if)#interface fastethernet 0/2 2950(config-if)#duplex half 2950(config-if)#speed 10 2950(config-if)#interface fastethernet 0/3 2950(config-if)#duplex auto 2950(config-if)#speed auto Posted by thomas The configuration would be either: ->Half duplex(i.e one way) ->Full duplex(i.e two way) Posted by sagitraz |
Posted: 25-April-2009 03:17:24 AM By: sagitraz The configuration would be either: ->Half duplex(i.e one way) ->Full duplex(i.e two way) | |
Posted: 27-April-2009 12:56:36 AM By: thomas Setting the appropriate duplex mode is done at the interface configuration prompt. The choices you have are Auto, Full, or Half; the default is Auto, so your switch should work in most cases if you do not make any configuration changes at all. Note that if you manually set duplex to Half or Full, the interface(s) will be locked to that setting and will no longer use the Auto negotiation to dynamically determine the duplex setting of the link(s). Following is an example of a configuration that sets Interface FastEthernet 0/1 to Full duplex/100Mbs, Interface 0/2 to Half Duplex/10Mbs, and Interface 0/3 to Auto Duplex/Auto speed: 2950#config terminal 2950(config)#interface fastethernet 0/1 2950(config-if)#duplex full 2950(config-if)#speed 100 2950(config-if)#interface fastethernet 0/2 2950(config-if)#duplex half 2950(config-if)#speed 10 2950(config-if)#interface fastethernet 0/3 2950(config-if)#duplex auto 2950(config-if)#speed auto | |
Posted: 27-April-2009 01:08:18 AM By: waqasahmad it is Full duplex(i.e two way) Half duplex(i.e one way) | |
Posted: 29-April-2009 02:51:47 AM By: crouse it is Full duplex(i.e two way) Half duplex(i.e one way) | |
Posted: 03-May-2009 06:19:13 AM By: crouse Half duplex Full duplex |