How DWDM wavelengths are deployed and explain optical power measurement?
danielmathew 18-December-2008 09:24:37 PM

Comments


Yes i think its true that optical power measurements used as a test source to measure the power...
Posted by HamidAliKhan


optical power measurements used as a test source to measure the power...
Posted by waqqas1


The above detail is correct for more detail information please visit following links:

->http://www.eetimes.com/story/OEG20040129S0029

->http://www.itu.int/ITU-T/newslog/Standard+Extends+DWDM+Distance.aspx
Posted by sagitraz


If DWDM wavelengths are to be deployed in the fiber, then optical power measurements or use the DWDM source itself as a test source. This is because optical fiber loss varies with wavelength. Also optical power measurement should be made in the same direction as the transmission system. Measurements in both directions will result in slightly different readings. Also, all fiber connections need to be clean, including the connections on the test equipment.
Posted by casey



Posted: 19-December-2008 02:21:15 PM By: casey

If DWDM wavelengths are to be deployed in the fiber, then optical power measurements or use the DWDM source itself as a test source. This is because optical fiber loss varies with wavelength. Also optical power measurement should be made in the same direction as the transmission system. Measurements in both directions will result in slightly different readings. Also, all fiber connections need to be clean, including the connections on the test equipment.

Posted: 21-December-2008 03:56:25 AM By: sagitraz

The above detail is correct for more detail information please visit following links:

->http://www.eetimes.com/story/OEG20040129S0029

->http://www.itu.int/ITU-T/newslog/Standard+Extends+DWDM+Distance.aspx

Posted: 23-December-2008 11:37:52 AM By: waqqas1

optical power measurements used as a test source to measure the power...

Posted: 30-January-2009 01:07:33 AM By: HamidAliKhan

Yes i think its true that optical power measurements used as a test source to measure the power...