How you can create vlans using wireless networking ?
waqqas1 14-November-2008 01:36:20 PM

Comments


SUMMARY STEPS
1. enable

2. configure terminal

3. dot11 ssid name

4. vlan vlan-id

5. exit

6. interface dot11Radio interface

7. ssid name

8. exit

9. exit

10. interface dot11Radio interface.x

11. encapsulation dot1q vlan-id [native]

12. end

13. copy running-config to startup-config

14. show vlans

15. show vlans

for detail login
http://www.cisco.com/en/US/docs/ios/12_4t/wlan/configuration/guide/wlcgvlan.html

Posted by mrleo99098


hey buddy you need certain things for create vlans on wireless so see that link it might help you
http://forums.whirlpool.net.au/forum-replies-archive.cfm/1058305.html
Posted by Hash007


Please Visit Following links:

1.)http://www.cisco.com/en/US/docs/ios/12_4t/wlan/configuration/guide/wlcgvlan.html

2.)http://searchsecurity.techtarget.com/generic/0,295582,sid14_gci1173811,00.html
Posted by sagitraz



Posted: 15-November-2008 03:21:08 AM By: sagitraz

Please Visit Following links:

1.)http://www.cisco.com/en/US/docs/ios/12_4t/wlan/configuration/guide/wlcgvlan.html

2.)http://searchsecurity.techtarget.com/generic/0,295582,sid14_gci1173811,00.html

Posted: 15-November-2008 03:28:40 AM By: Hash007

hey buddy you need certain things for create vlans on wireless so see that link it might help you
http://forums.whirlpool.net.au/forum-replies-archive.cfm/1058305.html

Posted: 18-November-2008 01:14:21 AM By: mrleo99098

SUMMARY STEPS
1. enable

2. configure terminal

3. dot11 ssid name

4. vlan vlan-id

5. exit

6. interface dot11Radio interface

7. ssid name

8. exit

9. exit

10. interface dot11Radio interface.x

11. encapsulation dot1q vlan-id [native]

12. end

13. copy running-config to startup-config

14. show vlans

15. show vlans

for detail login
http://www.cisco.com/en/US/docs/ios/12_4t/wlan/configuration/guide/wlcgvlan.html