Very simple question, how VOIP works? michaelchristopher 19-April-2008 02:13:34 PMComments VOIP is work as voice is encoded and then compress and then in form of ip packets and then it is transmitted on the ip network and all this work through NGN or SOFT Switch Posted by HamidAliKhan VoIP technology is voice transmission that goes over your Internet. The interesting thing about VoIP is that there is not just one way to place a call. There are three different "flavors" of VoIP service in common use today: * ATA -- The simplest and most common way is through the use of a device called an ATA (analog telephone adaptor). The ATA allows you to connect a standard phone to your computer or your Internet connection for use with VoIP. The ATA is an analog-to-digital converter. It takes the analog signal from your traditional phone and converts it into digital data for transmission over the Internet. Providers like Vonage and AT&T CallVantage are bundling ATAs free with their service. You simply crack the ATA out of the box, plug the cable from your phone that would normally go in the wall socket into the ATA, and you're ready to make VoIP calls. Some ATAs may ship with additional software that is loaded onto the host computer to configure it; but in any case, it's a very straightforward setup. * IP Phones -- These specialized phones look just like normal phones with a handset, cradle and buttons. But instead of having the standard RJ-11 phone connectors, IP phones have an RJ-45 Ethernet connector. IP phones connect directly to your router and have all the hardware and software necessary right onboard to handle the IP call. Wi-Fi phones allow subscribing callers to make VoIP calls from any Wi-Fi hot spot. * Computer-to-computer -- This is certainly the easiest way to use VoIP. You don't even have to pay for long-distance calls. There are several companies offering free or very low-cost software that you can use for this type of VoIP. All you need is the software, a microphone, speakers, a sound card and an Internet connection, preferably a fast one like you would get through a cable or DSL modem. Except for your normal monthly ISP fee, there is usually no charge for computer-to-computer calls, no matter the distance. Posted by shalinig VOIP converts the voice signal from phone into digital and on the other end again digital is converted to voice. One end to other end it travels over Internet. Posted by Andy08 VoIP, or Voice over Internet Protocol, is a method for taking analog audio signals, like the kind you hear when you talk on the phone, and turning them into digital data that can be transmitted over the Internet. working: The most common way VoIP works is that the end user establishes a hi speed broadband connection, a router and a VoIP gateway. Instead of a standard telephone line, the router sends the telephone calls over an internet connection. The VoIP gateway, placed somewhere in direct proximity of the connected Internet converts the analog signals into digital format, which are further broken down into smaller chunks called 'packets', before sending it over the internet, much like the way data is transmitted to and from the computer. These packets are sent to their final destination and instructions for bringing back into an understandable form are embedded in them. It then goes through a VoIP gateway where the packets are reconverted into the original analog format utilizing a PSTN (Public Telephone Switch Network), thereby routing the call to the number the caller has dialed blending old school technology and hi tech delivery in a seamless and instantaneous way. Posted by sagitraz |
Posted: 20-April-2008 07:56:46 AM By: sagitraz VoIP, or Voice over Internet Protocol, is a method for taking analog audio signals, like the kind you hear when you talk on the phone, and turning them into digital data that can be transmitted over the Internet. working: The most common way VoIP works is that the end user establishes a hi speed broadband connection, a router and a VoIP gateway. Instead of a standard telephone line, the router sends the telephone calls over an internet connection. The VoIP gateway, placed somewhere in direct proximity of the connected Internet converts the analog signals into digital format, which are further broken down into smaller chunks called 'packets', before sending it over the internet, much like the way data is transmitted to and from the computer. These packets are sent to their final destination and instructions for bringing back into an understandable form are embedded in them. It then goes through a VoIP gateway where the packets are reconverted into the original analog format utilizing a PSTN (Public Telephone Switch Network), thereby routing the call to the number the caller has dialed blending old school technology and hi tech delivery in a seamless and instantaneous way. | |
Posted: 21-April-2008 12:54:33 PM By: Andy08 VOIP converts the voice signal from phone into digital and on the other end again digital is converted to voice. One end to other end it travels over Internet. | |
Posted: 22-April-2008 01:02:46 AM By: shalinig VoIP technology is voice transmission that goes over your Internet. The interesting thing about VoIP is that there is not just one way to place a call. There are three different "flavors" of VoIP service in common use today: * ATA -- The simplest and most common way is through the use of a device called an ATA (analog telephone adaptor). The ATA allows you to connect a standard phone to your computer or your Internet connection for use with VoIP. The ATA is an analog-to-digital converter. It takes the analog signal from your traditional phone and converts it into digital data for transmission over the Internet. Providers like Vonage and AT&T CallVantage are bundling ATAs free with their service. You simply crack the ATA out of the box, plug the cable from your phone that would normally go in the wall socket into the ATA, and you're ready to make VoIP calls. Some ATAs may ship with additional software that is loaded onto the host computer to configure it; but in any case, it's a very straightforward setup. * IP Phones -- These specialized phones look just like normal phones with a handset, cradle and buttons. But instead of having the standard RJ-11 phone connectors, IP phones have an RJ-45 Ethernet connector. IP phones connect directly to your router and have all the hardware and software necessary right onboard to handle the IP call. Wi-Fi phones allow subscribing callers to make VoIP calls from any Wi-Fi hot spot. * Computer-to-computer -- This is certainly the easiest way to use VoIP. You don't even have to pay for long-distance calls. There are several companies offering free or very low-cost software that you can use for this type of VoIP. All you need is the software, a microphone, speakers, a sound card and an Internet connection, preferably a fast one like you would get through a cable or DSL modem. Except for your normal monthly ISP fee, there is usually no charge for computer-to-computer calls, no matter the distance. | |
Posted: 20-November-2008 10:00:26 AM By: HamidAliKhan VOIP is work as voice is encoded and then compress and then in form of ip packets and then it is transmitted on the ip network and all this work through NGN or SOFT Switch |