---

---

You may monitor VOIP Traffic in spectra2 by following 1.)First Create Sys Conf
2.)Conf Board Properties
3.)Conf Ethernet Port
4.)Enter Ip address range
5.)Select Port definition
6.)Select N/w Conf
7.)Click voip tool and place monitor voip
8.)Enter name of voip network for monitoring
9.)Assign ports
10)And finally click ok,run,capture and save
captured files.

---

Posted by HamidAliKhan

1.)First Create Sys Conf
2.)Conf Board Properties
3.)Conf Ethernet Port
4.)Enter Ip address range
5.)Select Port definition
6.)Select N/w Conf
7.)Click voip tool and place monitor voip
8.)Enter name of voip network for monitoring
9.)Assign ports
10)And finally click ok,run,capture and save
captured files.

---

Posted by waqqas1

Just follow the below procedure:

1.)First Create Sys Conf
2.)Conf Board Properties
3.)Conf Ethernet Port
4.)Enter Ip address range
5.)Select Port definition
6.)Select N/w Conf
7.)Click voip tool and place monitor voip
8.)Enter name of voip network for monitoring
9.)Assign ports
10)And finally click ok,run,capture and save
captured files.

---

Posted by sagitraz

Open workspace -> click configuration ->configure board properties ->configure ethernet port with correct version -> click monitor option-> enter ip address range ->select port definition from configurtion tab, select correct port and transpor type -> save -> select network configuration-> click voip tool -> clikc network diagram area and place monitor voip ->enter the name of voip network to monitor ->assign the appropriate ports ->click ok to return to network configuration window -> click OK, RUN, Capture and also save the capture file to view the stats

---

Posted by viswanathan